คำอธิบาย
DC10-30V BLDC Motor Driver
Driver specifications
- Driver type inductive brushless motor driver
- Voltage range DC10 – 30V
- Rated power < 50W
- Overcurrent protection 5.5A (Set by external resistor)
- Overvoltage protection 32V (Set by external resistor)
- Operating temperature -10°C–70°C Storage temperature -30°C–125°C
- Driver size length 35mm x width 58mm
Driver wiring (XH2.5-6 P socket )
- Red : Positive input of motor power supply (DC8V-28V).
- Black : The negative electrode of the motor power supply.
- Yellow : FG signal output (for external to detect motor speed, two pairs of pole magnetic rings. The motor turns around and outputs 6 square wave pulses).
- White : Motor forward and reverse control:
- When the port is not connected to the motor CCW
- When Connected to a low level (<0.6V) when the motor CW.
- Blue : Speed control speed control by PWM mode
- Low level (< 0.6V) When the motor is running,
- High levels (5 > V > 2V) motor stops
- Green : Brakes control
- The motor is running when the port is not connected
- Port is connected to a low level. (< 0.6V) the motor brakes
- The four pins 3, 4, 5, and 6 on the XH2.5-6P socket cannot be input
ในชุดประกอบด้วย
- ไดรเวอร์มอเตอร์บัสเลส BLDC Motor Driver DC10-30V/5.5A
รีวิว
ยังไม่มีบทวิจารณ์