MTBL12 มอเตอร์บัสเลส BLDC Motor DC12V/3.2W-4150RPM 8Wire BLDC3650+Driver

คำอธิบาย

มอเตอร์บัสเลส BLDC Motor DC12V/3.2W 4150RPM 8Wire BLDC3650+Driver

• Brushless stator 4-Pole magnetic brushless rotor 6-slot structure
• Noload Speed 4150 RPM
• Rate Speed 3400 RPM
• Voltage DC12V
• Rated Current 0.8A
• Power 3.2W
• Power Maximun 5.1W
• Outer diameter 36mm x 54mm (excluding shaft)
• Shaft length 9mm
• Shaft diameter 3.175mm
• Cable wire length 27cm
• Drive Mode Built-in sensory Hall drive
• Weight 120g

BLDC Motor Wiring (External Driver)

Dimension

Driver specifications

• Driver type inductive brushless motor driver
• Voltage range DC10V-30V
• Rated power <50W
• Overcurrent protection 5.5A (set by external resistor)
• Overvoltage protection 32V (set by external resistor)
• Operating temperature -10°C – -70°C Storage temperature: -30°C – -125°C
• Driver size length 35mm x width 58mm

Driver wiring (XH2.5-6 P socket )

1. Red : Positive input of motor power supply (DC8V-28V).
2. Black : The negative electrode of the motor power supply.
3. Yellow : FG signal output (for external to detect motor speed, two pairs of pole magnetic rings. The motor turns around and outputs 6 square wave pulses).
4. White : Motor forward and reverse control:
   1. When the port is not connected to the motor CCW
   2. When Connected to a low level (<0.6V) when the motor CW.
5. Blue : Speed control speed control by PWM mode
   1. Low level (< 0.6V) When the motor is running,
   2. High levels (5 > V > 2V) motor stops
6. Green : Brakes control
   1. The motor is running when the port is not connected
   2. Port is connected to a low level. (< 0.6V) the motor brakes

• The four pins 3, 4, 5, and 6 on the XH2.5-6P socket cannot be input

ในชุดประกอบด้วย

• 1pcs x มอเตอร์บัสเลส BLDC Motor DC12V 4150RPM BLDC3650 + 8Wire Cable Connector
• 1pcs x Driver  Board BLDC3650
• 1pcs x 6 Pin Cable Connector